LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Starting System (2GR-FKS) (Service Information) (Except Hybrid)) >> Ignition Switch >> Installation [11/2016 - ] >> Procedure

Installation [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Install the ignition or starter switch assembly to the upper steering column bracket assembly with the 2 screws.
  2. INSTALL UPPER STEERING COLUMN BRACKET WITH SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 12

  3. INSTALL STEERING COLUMN ASSEMBLY 

    Refer to INSTALLATION [12/2013 - ]

scientia non olet · About LEMON Manuals