Inspection [11/2016 - ]: Procedure
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FUEL PUMP
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
| Tester Connection |
Specified Condition |
| U - V |
0.05 to 3.0 Ω |
| V - W |
0.05 to 3.0 Ω |
| U - W |
0.05 to 3.0 Ω |
If the result is not as specified, replace the fuel pump.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *a |
Component without harness connected
(Fuel Pump) |