Installation [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL PUMP CONTROL ECU BRACKET
1. Install the fuel pump control ECU bracket to the fuel pump control ECU with the 2 bolts.
  Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
INSTALL FUEL PUMP CONTROL ECU
1. Install fuel pump control ECU to the vehicle body with the 2 nuts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Connect the 2 fuel pump control ECU connectors.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
Refer to PROCEDURE - Step 23
INSTALL ROPE HOOK (for LH Side)
Refer to PROCEDURE - Step 24
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)
Refer to PROCEDURE - Step 25
INSTALL DECK TRIM POCKET COVER (for LH Side)
Refer to PROCEDURE - Step 26
CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH
Refer to PROCEDURE - Step 11
INSTALL NO. 2 DECK SIDE TRIM COVER
Refer to PROCEDURE - Step 29
CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Refer to PROCEDURE - Step 14
INSTALL FRONT DECK SIDE TRIM COVER LH
Refer to PROCEDURE - Step 31
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
Refer to PROCEDURE - Step 49
INSTALL REAR DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 50
INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH
Refer to PROCEDURE - Step 4
INSTALL REAR NO. 2 SEAT ASSEMBLY
Refer to INSTALLATION [11/2016 - ]
INSTALL REAR FLOOR FINISH PLATE
Refer to PROCEDURE - Step 67
INSTALL REAR DECK FLOOR BOX
Refer to PROCEDURE - Step 68
INSTALL DECK SIDE TRIM BOX LH
Refer to PROCEDURE - Step 69
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY
Refer to PROCEDURE - Step 70
INSTALL DECK BOARD ASSEMBLY
Refer to PROCEDURE - Step 71