LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Fuel System (2GR-FKS) (Service Information) (Except Hybrid)) >> Fuel Pressure Sensor >> Installation [11/2016 - ] >> Procedure

Installation [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY (FUEL PRESSURE SENSOR) 

    HINT: 

    Perform "Inspection After Repair" after replacing the fuel delivery pipe with sensor assembly (fuel pressure sensor).

    Refer to INITIALIZATION [11/2016 - ]

    Refer to INSTALLATION [11/2016 - ] 

    NOTE:
    • Do not remove the fuel pressure sensor from the fuel delivery pipe with sensor assembly.
    • If the fuel pressure sensor is removed, replace the fuel delivery pipe with sensor assembly (fuel pressure sensor) with a new one.
  2. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after replacing the fuel delivery pipe with sensor assembly (fuel pressure sensor).

      Refer to INITIALIZATION [11/2016 - ]

scientia non olet · About LEMON Manuals