Caution / Notice / Hint

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Inspect the fuses for circuits related to this system before performing the following procedure.

HINT:

DTCs for the stop and start system are not cleared even if the malfunction has been repaired. After repairing the malfunction, be sure to clear the DTCs.
Refer to DTC CHECK / CLEAR [11/2016 - ]
Using the Techstream, read the freeze frame data before troubleshooting. System condition information is recorded as freeze frame data the moment a DTC is stored. This information can be useful when troubleshooting.
Refer to FREEZE FRAME DATA [11/2016 - ]