LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Stop And Start - Diagnostic Codes - (Except Hybrid)) >> Stop And Start System >> DTC P1644-00: ECU Internal Error [11/2016 - ] >> Description

DTC P1644-00: ECU Internal Error [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

If a malfunction is detected in the starter circuit, the engine stop and start ECU stores DTC P164400 and blinks the stop and start cancel indicator.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory Note
P164400 ECU Internal Error Both of the following conditions are met for 0.2 seconds or more (1 trip detection logic):
  • Ignition switch ON.
  • Malfunction in starter circuit (STA or STA2).
  • Wire harness or connector
  • ST relay
  • ST NO. 2 relay
  • Engine stop and start ECU
Blinks DTC stored SAE Code: P1644