DTC P160F-00: Charging Control System [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

If the engine stop and start ECU receives an abnormal charging control malfunction signal from the ECM, it will blink the stop and start cancel indicator and store DTC P160F00.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Warning Indicate	Memory	Note
P160F00	Charging Control System	Both of the following conditions are met for 1.5 seconds or more (1 trip detection logic): Charging control malfunction signal received from the ECM. Communication between the engine stop and start ECU and ECM is normal and 3 seconds or more have elapsed since the ignition switch was turned to ON.	Engine stop and start ECU Charging System	Blinks	DTC stored	SAE Code: P160F