LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Stop And Start - Diagnostic Codes - (Except Hybrid)) >> Stop And Start System >> DTC P1545-63: Starter Exceed Limited Number [11/2016 - ] >> Description

DTC P1545-63: Starter Exceed Limited Number [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

When the number of starter operations reaches the maximum number, the engine stop and start ECU stores DTC P154563 and blinks the stop and start cancel indicator.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory Note
P154563 Starter Exceed Limited Number Both of the following conditions are met (1 trip detection logic):
  • Ignition switch ON.
  • The number of starter operations reaches the specified limit.
  • Starter assembly
  • Engine stop and start ECU
Blinks DTC stored SAE Code: P1545