LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System (2GR-FKS) (Service Information) (Except Hybrid)) >> Knock Sensor >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FUEL DELIVERY PIPE 

    Refer to REMOVAL [11/2016 - ]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the 2 knock control sensor connectors.
      GTY644768Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for Bank 1
      *B for Bank 2
    2. Remove the 2 bolts and 2 knock control sensors from the cylinder block sub-assembly.
      NOTE:

      If a knock control sensor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals