Inspection [11/2016 - ]: Procedure
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY
HINT:
Use the same procedure for the intake side and exhaust side.
- Apply battery voltage to the camshaft timing oil control solenoid assembly and check that the plunger operates.
*a Component without harness connected
(Camshaft Timing Oil Control Solenoid Assembly)OK
The plunger extends outwards 5.9 mm (0.232 in.) or more.
If the result is not as specified, replace the camshaft timing oil control solenoid assembly.
- Apply battery voltage to the camshaft timing oil control solenoid assembly and check that the plunger operates.