Components [11/2016 - ]: Illustration
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Oil Control Valve (for Intake Side of Bank 1) Replacement Components With Torque Specifications (1 Of 2)
| Callout | Description | Callout | Description |
| *1 | ENGINE MOVING CONTROL ROD BRACKET | *2 | ENGINE WIRE |
| *3 | FRONT FENDER APRON SEAL RH | *4 | FRONT NO. 1 ENGINE MOUNTING BRACKET LH |
| *5 | NO. 2 ENGINE MOUNTING STAY RH | *6 | V-BANK COVER SUB-ASSEMBLY |
| *7 | WIRE HARNESS CLAMP BRACKET | - | - |
| N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with SST | |
| Do not apply lubricants to the threaded parts | - | - |
Fig 1: Camshaft Oil Control Valve (for Intake Side of Bank 1) Replacement Components With Torque Specifications (2 Of 2)
| Callout | Description | Callout | Description |
| *1 | CAMSHAFT TIMING GEAR BOLT | *2 | O-RING |
| *3 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1) | - | - |
| N*m (kgf*cm, ft.*lbf): Specified torque | • | Non-reusable part | |
| Adhesive 1324 | * | Precoated part |