Inspection [11/2016 - ]: Procedure
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT CAMSHAFT TIMING GEAR BOLT
- Check the stroke of the plunger in the center of the camshaft timing gear bolt.
*a Plunger Standard Stroke
2.2 mm (0.0866 in.) or more
HINT:
When pressing the plunger, there may be a stepped feeling. This is not a malfunction.
If the result is not as specified, replace the camshaft timing gear bolt.
- Check the stroke of the plunger in the center of the camshaft timing gear bolt.