LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Intake / Exhaust System (2GR-FKS) (Service Information) (Except Hybrid)) >> Vacuum Switching Valve (For ACIS) >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 25

  2. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY (for ACIS) 
    1. Disconnect the No. 1 vacuum switching valve assembly (for ACIS) connector.
      GTY628000Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 vacuum hose assemblies from the No. 1 vacuum switching valve assembly (for ACIS).
    3. Remove the bolt and No. 1 vacuum switching valve assembly (for ACIS) from the intake air surge tank assembly.
      GTY627999Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals