LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Intake / Exhaust System (2GR-FKS) (Service Information) (Except Hybrid)) >> Vacuum Switching Valve (For ACIS) >> Installation [11/2016 - ] >> Procedure

Installation [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY (for ACIS) 
    1. Install the No. 1 vacuum switching valve assembly (for ACIS) to the intake air surge tank assembly with the bolt.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

    2. Connect the 2 vacuum hose sub-assemblies to the No. 1 vacuum switching valve assembly (for ACIS).
    3. Connect the No. 1 vacuum switching valve assembly (for ACIS) connector.
  2. INSTALL V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 91

scientia non olet · About LEMON Manuals