Monitor Description
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
The ECM monitors the signals received from the No. 1 throttle position sensor and stop light switch assembly. As the ECM monitors the STP signal of the stop light switch assembly and the VTA1 signal of the No. 1 throttle position sensor, if these signals do not correlate, a DTC wii be stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P060E-49 | Internal Control Module Throttle Position Performance Internal Electronic Failure | Either of the following conditions is met (1 trip detection logic):
|
ECM | Comes on | DTC stored | SAE Code: P060E DTC for Mexico Models: - Applies |
| P061E-49 | Internal Control Module Brake Signal Internal Electronic Failure | Either of the following conditions is met (1 trip detection logic):
|
ECM | Comes on | DTC stored | SAE Code: P061E DTC for Mexico Models: - Applies |