Typical Enabling Conditions
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor runs whenever the following DTCs are not present | None |
| All of the following conditions are met | - |
| Battery voltage | 8 V or higher |
| Ignition switch | ON |
| Starter | Off |
| Time after ignition switch off to ON | 3 seconds or more |
| Engine | Running |
| Vehicle speed sensor monitor condition | Met |
| Lost communication with TCM (U0101) | Not detected |