LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Lubrication System (2GR-FKS) (Service Information) (Except Hybrid)) >> Oil Pump >> Disassembly [11/2016 - ] >> Procedure

Disassembly [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE OIL PUMP RELIEF VALVE 
    1. Using a 27 mm socket wrench, remove the oil pump relief valve plug from the oil pump cover.
      GTY682587Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the oil pump relief valve spring and oil pump relief valve from the oil pump cover hole.
  2. REMOVE OIL PUMP COVER 
    1. Remove the 8 bolts and oil pump cover from the timing chain cover assembly.
      GTY658158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE OIL PUMP ROTOR SET 
    1. Remove the drive rotor and driven rotor from the timing chain cover assembly.
      GTY658157Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals