LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Lubrication System (2GR-FKS) (Service Information) (Except Hybrid)) >> Oil Pan And Oil Level Sensor >> Inspection [11/2016 - ] >> Procedure

Inspection [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ENGINE OIL LEVEL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - Body ground ON Below 1 Ω
      OFF 10 kΩ or higher
      GTY541967Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Engine Oil Level Sensor)
      *b Engine Oil Level Sensor Body
      *c ON
      *d OFF

      If the result is not as specified, replace the engine oil level sensor.

scientia non olet · About LEMON Manuals