LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Panoramic View Monitor - Diagnostics - Introduction - (Except Hybrid)) >> Panoramic View Monitor System >> DTC Check / Clear [11/2016 - ] >> DTC Check / Clear [11/2016 - ]

DTC Check / Clear [11/2016 - ]

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Start the engine.
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Panoramic View Monitor / Trouble Codes.
    5. Check the details of the DTCs.

      Chassis > Panoramic View Monitor > Trouble Codes 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Start the engine.
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Panoramic View Monitor / Trouble Codes.
    5. According to the display on the Techstream, select the trouble code data display with the clear button.

      Chassis > Panoramic View Monitor > Clear DTCs 

scientia non olet · About LEMON Manuals