LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission (UA80F) - Service Information (1 Of 2) (Except Hybrid)) >> Speed Sensor >> Installation [11/2016 - ] >> Procedure

Installation [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NC) 
    1. Install the transmission revolution sensor (NC) to the counter drive gear sub-assembly with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Install the transmission revolution sensor (NT) to the automatic transaxle case sub-assembly with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [11/2016 - ] 

scientia non olet · About LEMON Manuals