LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission (UA80F) - Service Information (1 Of 2) (Except Hybrid)) >> Park / Neutral Position Switch >> On-Vehicle Inspection [11/2016 - ] >> Procedure

On-Vehicle Inspection [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. SECURE VEHICLE 
    1. Fully apply the parking brake and chock a wheel.
      WARNING:
      • Make sure to apply the parking brake and chock a wheel before performing this procedure.
      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
      GTY655852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION 
    1. Turn the ignition switch to ON.
    2. Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.
    3. Check that the back-up lights come on when the shift lever is moved to R, but do not come on with the shift lever in any other position.

      If the operation is not as specified, check the park/neutral position switch assembly.

      Refer to ADJUSTMENT [11/2016 - ] 

scientia non olet · About LEMON Manuals