Installation [11/2016 - ]: Procedure
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL TRANSMISSION REVOLUTION SENSOR (NC)
- Install the transmission revolution sensor (NC) to the counter drive gear sub-assembly with the bolt.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
- Install the transmission revolution sensor (NC) to the counter drive gear sub-assembly with the bolt.
- INSTALL TRANSMISSION REVOLUTION SENSOR (NT)
- Install the transmission revolution sensor (NT) to the automatic transaxle case sub-assembly with the bolt.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
- Install the transmission revolution sensor (NT) to the automatic transaxle case sub-assembly with the bolt.
- INSTALL TRANSMISSION VALVE BODY ASSEMBLY
Refer to INSTALLATION [11/2016 - ]