LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (2GR-FE) (Service Information) (Except Hybrid) (1 Of 2) >> Drive Belt >> Removal [12/2013 - 11/2016] >> Procedure

Removal [12/2013 - 11/2016]: Procedure

  1. REMOVE FRONT WHEEL RH 
  2. SEPARATE FRONT FENDER LINER RH 
    1. Remove the bolt, 4 screws and 4 clips and separate the front fender liner RH.
  3. REMOVE FRONT FENDER APRON SEAL RH 

    See step  14

  4. REMOVE V-RIBBED BELT 
    1. Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise.
      GTY427938Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a 5 mm Bi-hexagon Wrench
    2. While turning the V-ribbed belt tensioner counterclockwise, align its holes, and then insert a 5 mm hexagon wrench into the holes to secure the V-ribbed belt tensioner.
    3. Remove the V-ribbed belt from the V-ribbed belt tensioner.
scientia non olet · About LEMON Manuals