LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 95 (Engine Control System (2GR-FXE) (Service Information) (Hybrid)) >> Ignition Coil And Spark Plug >> Removal [02/2014 - 11/2016] >> Procedure

Removal [02/2014 - 11/2016]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE EGR COOLER ASSEMBLY 

    Refer to REMOVAL [02/2014 - 11/2016]

  2. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 6 ignition coil assembly connectors.
      GTY445404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for Bank 1
      *B for Bank 2
    2. Remove the 6 bolts and 6 ignition coil assemblies from the cylinder head cover sub-assembly.
      NOTE:

      If an ignition coil assembly has been struck or dropped, replace it.

      HINT: 

      Arrange the removed parts in the correct order.

  3. REMOVE SPARK PLUG 
    1. Remove the 6 spark plugs from the cylinder head sub-assembly.
      NOTE:

      If a spark plug has been struck or dropped, replace it.

      HINT: 

      Arrange the removed parts in the correct order.

      GTY194824Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals