LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (SFI System [2GR-FKS] - Diagnostic Codes - (Except Hybrid) (3 Of 4)) >> SFI System >> DTC P060A-47: Internal Control Module Monitoring Processor Performance Watchdog/Safety MCU Failure [11/2016 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The main CPU and sub CPU of the ECM perform data communication between each other. The main CPU monitors the communications and WDC pulses from the sub CPU. When the signal malfunctions below are detected, this DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P060A-47 Internal Control Module Monitoring Processor Performance Watchdog/Safety MCU Failure A CPU reset is performed after one of the following conditions is met (1 trip detection logic):
  • There is an ECM main CPU error.
  • There is an ECM sub CPU error.
  • There is an electronic throttle monitoring CPU error.
ECM Comes on DTC stored SAE Code: P060A
DTC for Mexico Models:
- Applies