LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (Except Hybrid) >> Hood >> Disassembly [12/2013 - ] >> Procedure

Disassembly [12/2013 - ]: Procedure

  1. REMOVE HOOD TO RADIATOR SUPPORT SEAL 
    1. Using a clip remover, remove the 3 hood to radiator support seal clips and hood to radiator support seal.
      GTY429949Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE HOOD TO RADIATOR SUPPORT SEAL 
    1. Using a clip remover, remove the 8 hood to radiator support seal clips and hood to radiator support seal.
      GTY429948Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE HOOD INSULATOR 
    1. Using a clip remover, remove the 7 hood insulator clips.
      GTY429947Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 guides and remove the hood insulator.
  4. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  5. DISCONNECT WASHER HOSE ASSEMBLY 
    1. Disengage the 6 clamps and disconnect the washer hose assembly.
      GTY429946Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE HOOD CUSHION 
    1. Disengage the 2 claws to remove the 2 hood cushions.
      GTY429945Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals