DTC C1626: Steering Angle Sensor Failure [12/2013 - ]: Procedure

1. Replace the steering sensor with a new or known good one.

   Refer to REMOVAL [12/2013 - ]

NEXT 

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [12/2013 - 11/2016] Refer to DTC CHECK / CLEAR [11/2016 - ]

   Chassis > Advanced Parking Guidance/Parking Assist Monitor > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Refer to DTC CHECK / CLEAR [12/2013 - 11/2016] Refer to DTC CHECK / CLEAR [11/2016 - ]

   Chassis > Advanced Parking Guidance/Parking Assist Monitor > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1626 is output	A
   DTC C1626 is not output	B

Result:  1

A 

REPLACE TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [12/2013 - ] 

Result:  2

B 

END