LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Service Information) (Except Hybrid) >> Rear Shock Absorber >> Disposal [12/2013 - ] >> Procedure

Disposal [12/2013 - ]: Procedure

  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY 
    1. Extend the piston rod and secure the rear shock absorber assembly at an angle in a vise.
      GTY444240Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
      WARNING:

      Be careful when drilling as shards of metal may fly about. Always use proper safety equipment.

      HINT: 

      The gas is colorless, odorless and non-poisonous.

scientia non olet · About LEMON Manuals