Installation [12/2013 - ]: Procedure

INSTALL FRONT SEAT AIRBAG SUB-ASSEMBLY RH
1. Install the front seat airbag sub-assembly RH with 3 new nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  WARNING:
  - The nuts must not be reused.
  - Make sure that the separate type front seat cushion spring assembly is not deformed. If it is, replace it with a new one.
2. Engage the claw and 3 clamps.
  HINT:
  
  Engage the claw first.
3. Install the front seat airbag sub-assembly RH wire harness to the seat clamp.
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH
For Manual Seat:

Refer to PROCEDURE - Step 15 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 15 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 16 (11/2016 -)

For Power Seat:

Refer to PROCEDURE - Step 17 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 17 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 18 (11/2016 -)
INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY RH
HINT:

Use the same procedure as for the LH side.

For Manual Seat:

Refer to PROCEDURE - Step 23 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 23 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 25 (11/2016 -)

For Power Seat:

Refer to PROCEDURE - Step 27 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 27 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 30 (11/2016 -)
INSTALL FRONT SEAT INNER CUSHION SHIELD RH
For Manual Seat:

Refer to PROCEDURE - Step 28 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 28 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 30 (11/2016 -)

For Power Seat:

Refer to PROCEDURE - Step 38 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 38 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 41 (11/2016 -)
INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Power Seat)
HINT:

Use the same procedure as for the LH side.

Refer to PROCEDURE - Step 34 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 34 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 37 (11/2016 -)
INSTALL FRONT SEAT CUSHION SHIELD RH
For Manual Seat:

Refer to PROCEDURE - Step 30 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 30 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 32 (11/2016 -)

For Power Seat:

Refer to PROCEDURE - Step 36 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 36 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 39 (11/2016 -)
INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)
HINT:

Use the same procedure as for the LH side.

Refer to PROCEDURE - Step 32 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 32 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 34 (11/2016 -)
CONNECT SEPARATE TYPE FRONT SEATBACK COVER RH
HINT:

Use the same procedure as for the LH side.

For Manual Seat:

Refer to PROCEDURE - Step 33 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 33 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 35 (11/2016 -)

For Power Seat without Climate Control Seat System:

Refer to PROCEDURE - Step 39 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 39 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 42 (11/2016 -)

For Power Seat with Climate Control Seat System:

Refer to PROCEDURE - Step 40 (12/2013 - 11/2015)

Refer to PROCEDURE - Step 40 (11/2015 - 11/2016)

Refer to PROCEDURE - Step 43 (11/2016 -)
INSTALL FRONT SEAT ASSEMBLY RH
HINT:

Use the same procedure as for the LH side.

For Manual Seat: Refer to INSTALLATION [12/2013 - ]

For Power Seat: Refer to INSTALLATION [12/2013 - ]
PERFORM DIAGNOSTIC SYSTEM CHECK
Refer to DTC CHECK / CLEAR [12/2013 - ]