LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (SFI System (2GR-FXS) - Diagnostic Codes - (Hybrid) (3 Of 4)) >> SFI System >> DTC P0088: Fuel Rail / System Pressure - Too High [11/2016 - ] >> Description

DTC P0088: Fuel Rail / System Pressure - Too High [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0087 (Refer to DESCRIPTION ).

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0088 Fuel Rail / System Pressure - Too High Although the ECM is requesting fuel pump assembly (for high pressure side) to open the spill control valve, fuel pressure increases 3 MPa (30.6 kgf/cm2 , 435 psi) from target pressure for about 10 seconds (1 trip detection logic).
  • Fuel pump assembly (for high pressure side)
  • Fuel delivery pipe with sensor assembly LH (fuel pressure sensor (for high pressure side))
  • ECM
Comes on DTC stored