LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) (Service Information) (Except Hybrid) >> Ejector Tube >> Inspection [12/2013 - ] >> Procedure

Inspection [12/2013 - ]: Procedure

  1. INSPECT BRAKE BOOSTER VACUUM EJECTOR 
    1. Visual inspection.
      1. Check that the brake booster vacuum ejector has no deformation or cracks.
    2. Check the operation.
      1. Check that suction occurs at the port (B) when applying compressed air into the port (A).
        GTY445628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If any defect is found, replace the brake booster vacuum ejector with a new one.

scientia non olet · About LEMON Manuals