LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) (Service Information) (Except Hybrid) >> Brake Booster >> Disassembly [11/2016 - ] >> Procedure

Disassembly [11/2016 - ]: Procedure

  1. REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY (for 1AR-FE) 
    1. Remove the 2 brake vacuum check valve assemblies from the brake booster assembly.
    2. Remove the 2 check valve grommets from the brake booster assembly.
  2. REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY (for 2GR-FKS) 
    1. Remove the brake vacuum check valve assembly from the brake booster assembly.
    2. Remove the check valve grommet from the brake booster assembly.
  3. REMOVE VACUUM WARNING SWITCH ASSEMBLY (for 2GR-FKS) 
    1. Remove the vacuum warning switch assembly from the brake booster assembly.
    2. Remove the check valve grommet from the brake booster assembly.
  4. REMOVE VACUUM SENSOR ASSEMBLY (w/ Stop and Start System) 
    1. Remove the vacuum sensor assembly from the brake booster assembly.
    2. Remove the check valve grommet from the brake booster assembly.
scientia non olet · About LEMON Manuals