Caution / Notice / Hint

NOTE:

The sliding roof auto operation function can be customized. Make sure that the function is set to ON.
Refer to CUSTOMIZE PARAMETERS [12/2013 - ]
If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) must be initialized.
Refer to INITIALIZATION [12/2013 - ]
The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2013 - ]
If a sliding roof ECU (sliding roof drive gear assembly) DTC is output, first perform troubleshooting for the sliding roof ECU (sliding roof drive gear assembly) DTC.
Refer to DTC CHECK / CLEAR [12/2013 - ]