LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> Rear No. 2 Seat Assembly >> Reassembly [12/2013 - 11/2016] >> Procedure

Reassembly [12/2013 - 11/2016]: Procedure

  1. INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for RH Side) 
    1. Engage the 4 cable clamps to install the rear No. 2 seat cushion lock cable assembly.
      GTY452893Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY RH 
    1. Engage the 4 cable clamps to install the rear No. 2 seat cushion lock cable assembly RH.
      GTY435245Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR NO. 2 SEAT RECLINING COVER RH (for RH Side) 
    1. Install the rear No. 2 seat reclining cover RH with the 2 screws.
      GTY454219Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL REAR NO. 2 SEAT RECLINING COVER LH (for RH Side) 
    1. Install the rear No. 2 seat reclining cover LH with the 2 screws.
      GTY441400Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL NO. 2 SEAT NO. 2 HINGE COVER 
    1. Engage the guide.
      GTY441420Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 2 seat No. 2 hinge cover with the screw.
  6. INSTALL NO. 2 SEAT NO. 4 HINGE COVER 
    1. Engage the guide.
      GTY441418Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 2 seat No. 4 hinge cover with the screw.
  7. INSTALL NO. 2 REAR SIDE SEAT BAND SUB-ASSEMBLY (for RH Side) 
    1. Engage the hook to install the No. 2 rear side seat band sub-assembly.
      GTY441419Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY RH 
    1. Temporarily install the No. 2 seatback cover sub-assembly RH to the separate type rear seatback pad.
    2. Using hog ring pliers, install the No. 2 seatback cover sub-assembly RH to the separate type rear seatback pad with 6 new hog rings.
      NOTE:
      • Be careful not to damage the No. 2 seatback cover sub-assembly RH.
      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seatback cover sub-assembly RH.
      GTY452909Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL NO. 2 SEATBACK COVER WITH PAD RH 
    1. Engage the 8 hooks to install the No. 2 seatback cover with pad RH.
      GTY435248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY 
    1. for Center:
      1. Engage the 4 claws to install the 2 rear No. 2 seat headrest support assemblies.
        GTY435244Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. for RH Side:
      1. Engage the 4 claws to install the 2 rear No. 2 seat headrest support assemblies.
        GTY435243Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. INSTALL NO. 2 REAR SEAT COVER BEZEL (for RH Side) 
    1. Engage the guide.
      GTY435286Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 2 rear seat cover bezel with the 2 screws.
  12. INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY (for RH Side) 
    1. Engage the hook to install the rear side seat band sub-assembly.
      GTY435247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL REAR SEAT BELT HOOK 
    1. Install the rear seat belt hook.
      GTY435246Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY RH 
    1. Engage the 12 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 seatback board sub-assembly RH.
      GTY456016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. INSTALL REAR NO. 2 SEATBACK COVER RH 
    1. Engage the 4 claws to install the rear No. 2 seatback cover RH.
      GTY435253Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. INSTALL NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY RH 
    1. Using a T45 "TORX" socket wrench, install the No. 2 seat cushion frame sub-assembly RH with the 2 bolts.
      GTY452895Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

  17. INSTALL NO. 1 REAR SEAT CUSHION HINGE COVER 
    1. Engage the guide and 4 claws to install the No. 1 rear seat cushion hinge cover as shown in the illustration.
      GTY441404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. INSTALL NO. 2 REAR SEAT CUSHION HINGE COVER 
    1. Engage the guide and 4 claws to install the No. 2 rear seat cushion hinge cover as shown in the illustration.
      GTY441405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. INSTALL REAR SEAT CUSHION HINGE COVER CAP 
    1. Engage the 2 guides and claw to install the rear seat cushion hinge cover cap.
      GTY435281Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH 
    1. Temporarily install the No. 2 seat cushion cover sub-assembly RH to the No. 2 rear cushion pad RH.
    2. Using hog ring pliers, install 11 new hog rings.
      NOTE:
      • Be careful not to damage the No. 2 seat cushion cover sub-assembly RH.
      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seat cushion cover sub-assembly RH.
      GTY435312Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly RH to the rear seat cushion pad RH with a new hog ring.
      NOTE:
      • Be careful not to damage the No. 2 seat cushion cover sub-assembly RH.
      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seat cushion cover sub-assembly RH.
      GTY435241Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. INSTALL NO. 2 SEAT CUSHION COVER WITH PAD RH 
    1. Engage the 13 hooks.
      GTY435262Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 clips and install the No. 2 seat cushion cover with pad RH.
      GTY452897Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. INSTALL NO. 2 SEAT ASSEMBLY RH 
    1. Install the 4 bolts.
      GTY452896Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

    2. Install the nut.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    3. Using a T45 "TORX" socket wrench, install the bolt.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    4. Engage the hook.
      GTY435258Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Install the No. 2 seat assembly RH with the 2 clips.
  23. INSTALL REAR SEAT INNER BELT COVER RH 
    1. Engage the 2 claws to install the rear seat inner belt cover RH.
      GTY435288Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  24. INSTALL NO. 2 SEAT HEADREST ASSEMBLY 
  25. INSTALL REAR SEAT HEADREST ASSEMBLY 
  26. INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY LH 
    1. Engage the 4 cable clamps to install the rear No. 2 seat cushion lock cable assembly LH.
      GTY435269Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  27. INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for LH Side) 
    1. Engage the 4 cable clamps to install the rear No. 2 seat cushion lock cable assembly.
      GTY435270Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  28. INSTALL REAR NO. 2 SEAT RECLINING COVER RH (for LH Side) 
    1. Install the rear No. 2 seat reclining cover RH with the 2 screws.
      GTY435267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  29. INSTALL REAR NO. 2 SEAT RECLINING COVER LH (for LH Side) 
    1. Install the rear No. 2 seat reclining cover LH with the 2 screws.
      GTY452898Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  30. INSTALL NO. 2 SEAT NO. 3 HINGE COVER 
    1. Engage the guide.
      GTY435265Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 2 seat No. 3 hinge cover with the screw.
  31. INSTALL NO. 2 SEAT HINGE COVER 
    1. Engage the guide.
      GTY435266Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 2 seat hinge cover with the screw.
  32. INSTALL NO. 2 REAR SIDE SEAT BAND SUB-ASSEMBLY (for LH Side) 
    1. Engage the hook to install the No. 2 rear side seat band sub-assembly.
      GTY435264Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  33. INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY LH 
    1. Temporarily install the No. 2 seatback cover sub-assembly LH to the separate type rear seatback pad.
    2. Using hog ring pliers, install the No. 2 seatback cover sub-assembly LH to the separate type rear seatback pad with 6 new hog rings.
      NOTE:
      • Be careful not to damage the No. 2 seatback cover sub-assembly LH.
      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seatback cover sub-assembly LH.
      GTY435273Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  34. INSTALL NO. 2 SEATBACK COVER WITH PAD LH 
    1. Engage the 4 hooks to install the No. 2 seatback cover with pad LH.
      GTY435263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  35. INSTALL REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY 
    1. Engage the 4 claws to install the 2 rear No. 2 seat headrest support assemblies.
      GTY435271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  36. INSTALL NO. 2 REAR SEAT COVER BEZEL (for LH Side) 
    1. Engage the guide.
      GTY452902Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 2 rear seat cover bezel with the 2 screws.
  37. INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY (for LH Side) 
    1. Engage the hook to install the rear side seat band sub-assembly.
      GTY435283Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 3 hooks.
      GTY435276Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  38. INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH 
    1. Engage the 8 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 seatback board sub-assembly LH.
      GTY445228Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  39. INSTALL NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH 
    1. Using a T45 "TORX" socket wrench, install the No. 2 seat cushion frame sub-assembly LH with the 2 bolts.
      GTY435277Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

  40. INSTALL NO. 3 REAR SEAT CUSHION HINGE COVER 
    1. Engage the guide and 4 claws to install the No. 3 rear seat cushion hinge cover as shown in the illustration.
      GTY452901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  41. INSTALL REAR SEAT CUSHION HINGE COVER CAP 
    1. Engage the 2 guides and claw to install the rear seat cushion hinge cover cap.
      GTY435280Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  42. INSTALL LOWER REAR SEAT CUSHION HINGE COVER LH 
    1. Engage the guide and 4 claws to install the lower rear seat cushion hinge cover LH as shown in the illustration.
      GTY435296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  43. INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH 
    1. Temporarily install the No. 2 seat cushion cover sub-assembly LH to the rear seat cushion pad LH.
    2. Using hog ring pliers, install a new hog ring.
      NOTE:
      • Be careful not to damage the No. 2 seat cushion cover sub-assembly LH.
      • Be sure to securely install the hog ring as shown in the illustration while preventing wrinkles from forming on the No. 2 seat cushion cover sub-assembly LH.
      GTY435257Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly LH to the rear seat cushion pad LH with 10 new hog rings.
      NOTE:
      • Be careful not to damage the No. 2 seat cushion cover sub-assembly LH.
      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seat cushion cover sub-assembly LH.
      GTY435255Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  44. INSTALL NO. 2 SEAT CUSHION COVER WITH PAD LH 
    1. Engage the 8 hooks.
      GTY435293Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the hook.
      GTY435291Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Engage the 2 clips and install the No. 2 seat cushion cover with pad LH.
      GTY435290Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  45. INSTALL NO. 2 SEAT ASSEMBLY LH 
    1. Install the 4 bolts.
      GTY435292Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

    2. Using a T45 "TORX" socket wrench, install the 2 bolts.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    3. Install the No. 2 seat assembly LH with the 2 clips.
      GTY452903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  46. INSTALL REAR SEAT INNER BELT COVER LH 
    1. Engage the 2 claws to install the rear seat inner belt cover LH.
      GTY452904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  47. INSTALL REAR SEAT HEADREST ASSEMBLY 
scientia non olet · About LEMON Manuals