DTC C1581: Assist Map Number Un-Writing [08/2013 - 12/2013]: Procedure
- PERFORM ASSIST MAP WRITING
- Perform the assist map writing. Refer to CALIBRATION [08/2013 - ] .
NEXT: Go to next step
- CHECK DTC OUTPUT
- Check for DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ]
.RESULT
Result Proceed to DTC C1581 is not output A DTC C1581 is output B
B → See step 3
A → END
- Check for DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ]
.
- CHECK CAN COMMUNICATION SYSTEM
- Check for DTCs of the CAN communication system. Refer to DIAGNOSIS SYSTEM [08/2013 - 12/2013]
.RESULT
Result Proceed to DTCs are not output A DTCs are output B
B → See step 7
A: Go to next step
- Check for DTCs of the CAN communication system. Refer to DIAGNOSIS SYSTEM [08/2013 - 12/2013]
.
- CHECK SFI SYSTEM
- Check for DTCs of the SFI system. Refer to DTC CHECK / CLEAR [08/2013 - 12/2013]
.RESULT
Result Proceed to DTCs are not output A DTCs are output B
B → See step 8
A: Go to next step
- Check for DTCs of the SFI system. Refer to DTC CHECK / CLEAR [08/2013 - 12/2013]
.
- CHECK VEHICLE STABILITY CONTROL SYSTEM
- Check the vehicle stability control system. Refer to DTC CHECK / CLEAR [08/2013 - ]
.RESULT
Result Proceed to DTCs are not output A DTCs are output B
B → See step 9
A → See step 6
- Check the vehicle stability control system. Refer to DTC CHECK / CLEAR [08/2013 - ]
.
- REPLACE POWER STEERING ECU ASSEMBLY. Refer to REMOVAL [08/2013 - ]
- GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - 12/2013]
- GO TO SFI SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - 12/2013]
- GO TO VEHICLE STABILITY CONTROL SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - 12/2013]