Installation [12/2013 - ]

INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
1. Install the child restraint seat tether anchor bracket with the bolt.
  Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
  
  HINT:
  
  Use the same procedure for the other 2 child restraint seat tether anchor brackets.
INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY See step 3
INSTALL REAR SEAT SHOULDER BELT COVER See step 4
INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER See step 5
INSTALL CENTER STOP LIGHT SET . Refer to INSTALLATION [08/2013 - ] - Step 1
CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH See step 7
INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH See step 1
CONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side) See step 9
CONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side) See step 10
INSTALL ROOF SIDE INNER GARNISH LH . Refer to INSTALLATION [12/2013 - ] - Step 20
INSTALL ROOF SIDE INNER GARNISH RH
HINT:

Use the same procedure as for the LH side.
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH . Refer to INSTALLATION [12/2013 - ] - Step 25
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH . Refer to INSTALLATION [12/2013 - ] - Step 32
INSTALL REAR SIDE SEATBACK ASSEMBLY LH . Refer to INSTALLATION [12/2013 - ] - Step 2
INSTALL REAR SIDE SEATBACK ASSEMBLY RH . Refer to INSTALLATION [12/2013 - ] - Step 1
INSTALL REAR SEATBACK ASSEMBLY LH . Refer to INSTALLATION [12/2013 - ] - Step 4
INSTALL INNER LUGGAGE COMPARTMENT TRIM PAD . Refer to INSTALLATION [12/2013 - ] - Step 5
INSTALL REAR SEAT CUSHION LOCK HOOK . Refer to INSTALLATION [12/2013 - ] - Step 6
INSTALL REAR SEAT CUSHION ASSEMBLY . Refer to INSTALLATION [12/2013 - ] - Step 7
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [12/2013 - ] .
INSPECT SRS WARNING LIGHT
Refer to DIAGNOSIS SYSTEM [08/2013 - ]