Removal [12/2013 - ]

HINT: 

• Use the same procedure for the RH and LH sides.
• The procedure described below is for the LH side.

1. REMOVE REAR BUMPER ASSEMBLY 

   Refer to REMOVAL [08/2013 - ]

2. REMOVE SPARE WHEEL COVER ASSEMBLY  . Refer to REMOVAL [12/2013 - ] - Step 1
3. REMOVE REAR FLOOR FINISH PLATE  . Refer to REMOVAL [12/2013 - ] - Step 2
4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  . Refer to REMOVAL [12/2013 - ] - Step 20
5. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER  . Refer to REMOVAL [12/2013 - ] - Step 4
6. REMOVE REAR COMBINATION LIGHT ASSEMBLY 
   1. Disconnect each connector.
      Fig 1: Identifying Rear Combination Light Assembly Connectors And Clamp

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Disengage the clamp.
   3. Remove the 4 nuts and rear combination light assembly.
      Fig 2: Identifying Rear Combination Light Assembly Fasteners

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002