Inspection [08/2013 - ]
- INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
LIGHT CONTROL SWITCH (W/ DRL OFF FUNCTION)Tester Connection Switch Condition Specified Condition 18 (T) - 15 (EL) Light control switch off (DRL OFF position) 10 kΩ or higher 19 (H) - 15 (EL) 10 kΩ or higher 20 (A) - 15 (EL) 10 kΩ or higher 20 (A) - 15 (EL) Light control switch in AUTO position Below 1 Ω 18 (T) - 15 (EL) Light control switch in tail position Below 1 Ω 18 (T) - 15 (EL) Light control switch in head position Below 1 Ω 19 (H) - 15 (EL) Below 1 Ω LIGHT CONTROL SWITCH (W/O DRL OFF FUNCTION)Tester Connection Switch Condition Specified Condition 18 (T) - 15 (EL) Light control switch off 10 kΩ or higher 19 (H) - 15 (EL) 10 kΩ or higher 20 (A) - 15 (EL) 10 kΩ or higher 18 (T) - 15 (EL) Light control switch in tail position Below 1 Ω 18 (T) - 15 (EL) Light control switch in head position Below 1 Ω 19 (H) - 15 (EL) Below 1 Ω 20 (A) - 15 (EL) Light control switch in AUTO position Below 1 Ω DIMMER SWITCHTester Connection Switch Condition Specified Condition 14 (HU) - 15 (EL) Dimmer switch in high position Below 1 Ω 14 (HU) - 15 (EL) Dimmer switch in high flasher position Below 1 Ω 17 (HF) - 15 (EL) Below 1 Ω TURN SIGNAL SWITCHTester Connection Switch Condition Specified Condition 12 (TR) - 15 (EL) Neutral 10 kΩ or higher 11 (TL) - 15 (EL) 10 kΩ or higher 13 (CR) - 15 (EL) 10 kΩ or higher 12 (TR) - 15 (EL) Right turn Below 1 Ω 13 (CR) - 15 (EL) Right turn fully Below 1 Ω 11 (TL) - 15 (EL) Left turn Below 1 Ω 13 (CR) - 15 (EL) Left turn fully Below 1 Ω FRONT FOG LIGHT SWITCH*1Tester Connection Switch Condition Specified Condition 8 (LFG) - 9 (BFG) Front fog light switch off 10 kΩ or higher 8 (LFG) - 9 (BFG) Front fog light switch on Below 1 Ω - *1: w/ Front Fog Light
TEXT IN ILLUSTRATION*a Component without harness connected
(Headlight Dimmer Switch Assembly)If the result is not as specified, replace the headlight dimmer switch assembly.
- Measure the resistance according to the value(s) in the table below.