DTC C1626: Steering Angle Sensor Failure [12/2013 - ]: Procedure

REPLACE STEERING SENSOR
1. Replace the steering sensor. Refer to REMOVAL [08/2013 - ] .
NEXT: Go to next step

CHECK DTC OUTPUT

Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .

Check for DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .

Result

Result	Proceed to
DTC C1626 is output	A
No DTCs are output	B

B → END

A → See step 3

REPLACE NAVIGATION ECU SUB-ASSEMBLY. Refer to REMOVAL [12/2013 - ]