Removal [10/2013 - ]

Refer to REMOVAL [10/2013 - ]

1. Disconnect the connector.
   Fig 1: Identifying Remote Engine Starter ECU With Bracket (w/o Glass Breakage Sensor) Connector, Nut & Guide

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the nut.
3. Disengage the guide.
4. Disengage the clamp and remove the remote engine starter ECU with bracket.
   Fig 2: Identifying Remote Engine Starter ECU With Bracket (w/o Glass Breakage Sensor) Clamp

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. w/o Glass Breakage Sensor:
   1. Remove the bolt and bracket.
      Fig 3: Identifying Remote Engine Starter ECU (w/o Glass Breakage Sensor) Bolt & Bracket

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION
      
      

      *1

      Bracket

2. w/ Glass Breakage Sensor
   1. Remove the bolt and glass breakage sensor ECU.
      Fig 4: Identifying Glass Breakage Sensor ECU Bolt & Bracket

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION
      
      

      *1	Glass Breakage Sensor ECU

3. Disengage the claw and remove the remote engine starter ECU as shown in the illustration.
   Fig 5: Identifying Remote Engine Starter ECU Claw & Removal Direction

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002