Green And Red Indicators Do Not Come On When IG-On [10/2013 - ]: Procedure

1. Turn the engine switch off.
2. Connect the Techstream to the DLC3.
3. Turn the engine switch on (IG) and wait for 10 seconds.
4. Turn the Techstream on.
5. Perform "Health Check" using the Techstream and check that Telematics (Safety Connect) is listed on "Health Check Result". Refer to HEALTH CHECK [10/2013 - ] .

   Result

   Result	Proceed to
   "Telematics" is displayed on the Techstream.	A
   "Telematics" is not displayed on the Techstream.	B

B → See step   3 

A: Go to next step 

1. Turn the engine switch off.
2. Connect the Techstream to the DLC3.
3. Turn the engine switch on (IG) and wait for 10 seconds.
4. Turn the Techstream on.
5. Check current DTC and history DTCs. Refer to DTC CHECK / CLEAR [10/2013 - ] .

   Result

   Result	Proceed to
   DTC is not output.	A
   DTC is output.	B

B → See step   5 

A → See step   4