LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> 4Runner Trail >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Diagnostics - Introduction) >> Meter / Gauge System >> Customize Parameters [08/2013 - ] >> Customize Parameters [08/2013 - ]

Customize Parameters [08/2013 - ]

  1. METER/GAUGE SYSTEM 
    1. Combination Meter
      NOTE:
      • Record the current settings before customizing.
      • When the customer requests a change in a function, first make sure that the function can be customized.

      HINT: 

      The following items can be customized using the Techstream.

      WARNING

      Tester Display Default Content Setting
      Driver Side Seatbelt Warning Buzzer* ON Function to turn on or off the seat belt warning buzzer ON or OFF
      Front Passenger Side Seatbelt Warning Buzzer* ON Function to turn on or off the seat belt warning buzzer ON or OFF
      • *: This setting is only valid for the buzzer which sounds at 20 km/h (12 MPH) or more.
      DISPLAY

      Tester Display Default Content Setting
      ECO Drive Indicator Zone ON Function to enable or disable eco driving indicator zone display in the multi-information display ON or OFF
scientia non olet · About LEMON Manuals