Removal [12/2012 - 08/2016]: Procedure
- REMOVE REAR SEAT NO. 3 LEG SIDE COVER
- Using a screwdriver, detach the 4 claws.
HINT:
Tape the screwdriver tip before use.
- Detach the 2 guides and remove the rear seat No. 3 leg side cover in the direction shown by the arrow in the illustration.
- Using a screwdriver, detach the 4 claws.
- REMOVE REAR SEAT FRONT BRACKET COVER LH
- REMOVE REAR SEAT ASSEMBLY LH
- Lift up the seat track adjusting handle and move the seat to the rearmost position.
- Remove the 2 bolts on the front side of the seat.
- Lift up the seat track adjusting handle and move the seat to the foremost position.
w/ Seat Belt Warning System:
Remove the connector.
- Remove the 3 bolts on the rear side of the seat.
- Fully tilt the seatback forward. Then remove the rear seat assembly LH.NOTE:
Be careful not to damage the vehicle body.
- REMOVE SEAT LEG BRACKET
- Detach the clamp and remove the 4 bolts.
- Detach the guide to remove the seat leg bracket.