Installation [12/2012 - ]: Procedure

INSTALL SPARK PLUG
1. Using a 16 mm spark plug wrench, install the 4 spark plugs.
  Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
  
  HINT:
  
  Perform "Inspection After Repairs" after replacing the spark plug.
  
  Refer to INITIALIZATION [12/2012 - ]
INSTALL IGNITION COIL ASSEMBLY
1. Install the 4 ignition coil assemblies with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  HINT:
  
  Perform "Inspection After Repairs" after replacing the ignition coil assembly.
  
  Refer to INITIALIZATION [12/2012 - ]
2. Connect the 4 ignition coil assembly connectors.
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
See step 5