LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> RAV4 LE, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (2AR-FE) (Service Information) (Except Hybrid) >> Thermostat >> Removal [12/2012 - ] >> Procedure

Removal [12/2012 - ]: Procedure

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  2. REMOVE NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 6

  3. DRAIN ENGINE COOLANT 

    See step  2

  4. REMOVE GENERATOR ASSEMBLY 

    Refer to REMOVAL [12/2012 - ]

  5. DISCONNECT NO. 2 RADIATOR HOSE 
    1. Slide the hose clamp and disconnect the No. 2 radiator hose from the water inlet.
      GTY230333Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE WATER INLET 
    1. Remove the 2 nuts and water inlet.
      GTY314625Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE THERMOSTAT 
    1. Remove the thermostat.
    2. Remove the gasket from the thermostat.
scientia non olet · About LEMON Manuals