Caution / Notice / Hint
NOTE:
- Confirm that there are no CAN communication system malfunctions before performing the following inspection.
Refer to ADJUSTMENT [10/2015 - ] .
- If the main body ECU (multiplex network body ECU) is replaced, refer to Registration.
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
- If the forward recognition camera has been replaced with a new one, be sure to perform Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust.
Refer to PRECAUTION [12/2012 - ] .