Sliding Roof Housing: Disassembly: Disassembly

REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY
1. Using a T25 "TORX" socket wrench, remove the 3 screws.
  
  Fig 1: Identifying Sliding Roof Drive Gear Sub-Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the sliding roof drive gear sub-assembly.
REMOVE SUNSHADE TRIM SUB-ASSEMBLY
1. Remove the sunshade trim stopper.
  
  Fig 2: Removing Sunshade Trim Stopper
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Use the same procedure for the RH side and the LH side.
2. Slide and remove the sunshade trim sub-assembly.
  
  Fig 3: Sliding And Remove Sunshade Trim Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002