LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> Highlander SE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Automatic Transmission (U760E) (Service Information) (Except Hybrid)) >> Shift Lever >> On-Vehicle Inspection >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT SHIFT LEVER POSITION 
    1. When shifting from the P position to the R position with the ignition switch ON and the brake pedal depressed, make sure that the shift lever moves smoothly and correctly into the position.
    2. Start the engine and make sure that the vehicle moves forward when shifting from the N position to the D position and moves rearward when shifting to the R position. If the operation cannot be done as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.
scientia non olet · About LEMON Manuals