Air Fuel Ratio Sensor: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE NO. 1 ENGINE UNDER COVER
REMOVE AIR FUEL RATIO SENSOR
1. Disconnect the air fuel ratio sensor connector.
  
  Fig 1: Identifying Air Fuel Ratio Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, remove the air fuel ratio sensor from the exhaust manifold.
  
  Fig 2: Identifying SST To Remove Air Fuel Ratio Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - SST: 09224-00010