Inspection Procedure
NOTE:
- When DTC B2342 and B2343 are output simultaneously, perform troubleshooting for DTC B2342 first.
- When the sliding roof ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized. Refer to INITIALIZATION .
- The sliding roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .